How to factory reset (unbrick):
	Hold reset button
	plug in power
	keep heald until after the 5th flash (ignore the first "flash")
		you should see a second green led come on after releasing
		if 2 green leds remain on you need to start over

	conenct via ethernet on the LAN port
	set your computer to 192.168.1.2 (255.255.255.0)

	navigate to 192.168.1.1, upload new .bin


PineAP not starting?
	try performing factory reset (link) and re uplaod (with everything deleted)


Wifi not starting / No LEDs lit up?
	try performing factory reset (link) and re uplaod (with everything deleted)

No SSH
	try performing factory reset (link) and re uplaod (with everything deleted)

Cant get to 172.16.42.1:1471?
	Did you set your computer's IP to 172.16.42.42?

Can't download modules?
	you need to connect the pineapple to internet
		add a cable into the WAN port
		set up wifi client

Lost your password?
	not sure what to do???????


	<!-- Advanced -->
	<div class="jumbotron">
		<h1 class="display-3">Troubleshooting</h1>
		<p class="lead">
			<a href="https://dl.gl-inet.com/firmware/ar150/clean/gl-ar150-3.0-1011_clean.bin" target="_blank">Download orignal firmware</a>
		</p>
	</div>
	<!-- /.Advanced -->